3 6 " (1-3/8") 6013ER Manufacturer reserves the right t o change specifications of parts and accessories without notice. Note: Specifications of parts and accessories may differ from country to country. MODEL 6013B MODEL 6013BR Continuous rating No load speed...
SAFETY INSTRUCTIONS WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. CONSIDER WORK AREA ENVIRONMENT.
REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in. 16.
@Chuck @Grip How to use Chuck When installing drill bit with the chuck key, notice that there are three holes in the chuck where the bit should be tightened, not just one. Tighten evenly a t all three holes in order.
MAINTENANCE Carbon brushes Replace carbon brushes when they wear down to about 5 mm (3/16") or sparking will occur. Both brushes should changed at the same time. wood drill with guide screw, there no need to bear itself.
Optional Accessories CAUTION: The use of any other accessories not specified in this manual might be hazardous. .TYPE 43 Bench Drill Stand (For Model 60138) Part 1 2 2 1 9 0 - 0 )del 60138) ikita ngle Attachment (For h (Ideal for drilling in tight corners or difficult access area).
Aug.-20-'84 (1/2") DRILL Model 6013BR Note: The switch and other part configurations may differ from country to country.
Note: The switch and other parl specifications may differ from country to country MAKFA LIMm ONE YEAR WARRANTY Every Makita tool is thorou ly inspected and tested before leaving the factory. It is warranted to w o r k i s h ~ be free of defects from original purchase.