Print Quality Difficulties; Network Difficulties - Brother DCP-9042CDN User Manual

Print quality difficulties

Difficulties
Printed pages are curled.
Printed pages are smeared.
Printouts are too light.

Network difficulties

Difficulties
Cannot print over a wired Network. Make sure your machine is powered on and is on-line and in Ready mode. Print
48
Suggestions
Low quality thin or thick paper or not printing on the recommended side of the
paper could cause this problem. Try turning over the stack of paper in the
paper tray.
Make sure that you choose the Paper Type that suits the media type you are
using. (See Acceptable paper and other media on page 9.)
The Paper Type setting may be incorrect for the type of print media you are using,
or the print media may be too thick or have a rough surface. (See Acceptable
paper and other media on page 9 and Basic tab in the Software User's Guide on
the CD-ROM.)
If this problem occurs when making copies, turn Toner Save mode to off in the
machine menu settings. (See Toner save on page 22.)
Set Toner Save mode to off in the Advanced tab in the printer driver. (See
Advanced tab in the Software User's Guide on the CD-ROM.)
Suggestions
the Network Configuration list to see your current Network settings. (See User
Settings List on page 22.) Reconnect the LAN cable to the hub to verify that the
cable and network connections are good. If possible, try connecting the machine
to a different port on your hub using a different cable. If the connections are good,
the upper LED of the back panel of the machine will be green.