Ecology Features; Toner Save; Sleep Time; Lcd Contrast - Brother DCP-9042CDN User Manual

Hide thumbs Also See for DCP-9042CDN:
Table of Contents

Advertisement

Chapter 3

Ecology features

Toner save

You can save toner using this feature. When
you set toner save to On, print appears
lighter. The default setting is Off.
a
Press Menu, 1, 4, 1.
Ecology
1.Toner Save
b
Press a or b to choose On (or Off).
Press OK.
c
Press Stop/Exit.
Note
We DO NOT recommend Toner Save for
printing Photo or Greyscale images.

Sleep time

Setting the sleep time reduces power
consumption by turning off the fuser while the
machine is idle.
You can choose how long the machine must
be idle (from 000 to 240 minutes) before it
goes into sleep mode. When the machine
receives computer data or makes a copy, the
timer will be reset. The default setting is
005 minutes.
While the machine is in sleep mode the LCD
will display Sleep. When printing or copying
in sleep mode, there will be a short delay
while the fuser warms up.
a
Press Menu 1, 4, 2.
Ecology
2.Sleep Time
b
Enter the length of time the machine is
idle before entering sleep mode (000 to
240).
Press OK.
c
Press Stop/Exit.
22

LCD contrast

3
You can change the contrast to make the
LCD look lighter or darker.
3
a
Press Menu, 1, 6.
General Setup
6.LCD Contrast
b
Press a to make the LCD darker. Or,
press b to make the LCD lighter.
Press OK.
c
Press Stop/Exit.

User Settings List

You can print a list of the settings you
programmed including the network
configuration.
a
Press Menu, 5, 3.
3
Machine Info.
3.User Settings
b
Press Mono Start or Colour Start.
c
Press Stop/Exit.
3
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcp-9040cn

Table of Contents