Receipt Paper Installation; Commom Terminal Error Messages - Hypercom Optimum T42 series User Manual

VI. RECEIPT PAPER INSTALLATION
Installation of the receipt thermal paper in the terminal.
STEP ACTION DISPLAY
1 Remove terminal and paper roll
from its packaging.
2 With your fingers, open the
printer cover as shown.
3 Drop paper roll into paper
holder as shown.
Pull paper as shown.
Close the printer cover.
4 Pull and tear paper against the
paper receipt tear bar as shown.
VII. COMMOM TERMINAL ERROR
MESSAGES
MESSAGE
Displayed when paper failure has been detected
PAPER OUT
*
by the terminal.
*
WAITING FOR LINE / LINE IDLE The telephone line is engaged or disconnected.
The card is swiped incorrectly, or the card reader
* CARD ERROR
is defective.
Displayed when an attempt has been made to
TRAN NOT ALLOWED FOR CARD
process a transaction which is not allowed by the
SCHEME / CARD SCHEME NOT
*
bank card scheme represented by card account
SUPPORTED / UNSUPPORTED CARD
number.
Displayed when the cardholder has
* ALLOWABLE PIN TRIES EXCEEDED unsuccessfully entered a PIN the maximum
number of times.
Manually entered card numbers are not
* MANUAL ENTRY NOT ALLOWED
allowed in this operation.
RETRY PIN / INCORRECT PIN / Displayed when an incorrect PIN has been
*
WRONG PIN entered.
EXPIRED CARD, CONTACT YOUR The card is already expired, or the expiry date is
*
BANK incorrectly entered.
Displayed when the selected application is
* APPLICATION BLOCKED
blocked.
* CARD BLOCKED Displayed when the card is blocked.
* PIN BLOCKED Displayed when the offline PIN has been blocked.
Displayed when an offline PIN has been
* TRIES LEFT : XX incorrectly entered. XX is the number of tries
remaining.
DESCRIPTION