Sanyo SFX-33 Service Manual page 8

Before programming the one-touch, speed dial memory and setting your station name, you need to know to enter
names using number keys and one-touch keys.
The one-touch keys [6], [7] and [8] are used for name programming.
The characters are grouped as shown below:
Group 1
Group 2 Group 3
ABCDE abcde 12345
FGHIJ
fghij 67890
KLMNO klmno
.*
.,. ,
PQRST pqrst +-/&*
UVWXY Uvwxy
# '"()
z z <>!?=
mm
CmXD
am
Registration Selection
Area
Area
~~
:ABCDE
—
Cur130rl
CuJ50r2
The LCD display is divided into 2 sections: The registration area (left) shows the name being entered, and in
the selection area (right), a set of 5 characters appears as you scroll up or down the display. Each area has a
separate cursor.
Selecting a character
L
1. Use number key [5] to select the desired character group.
The first line of the selected group appears each time the number key [5] is pressed.
2. Use number keys [2] or [8] to scroll up or down the display.
3. Use number keys [4] or [6] to move the cursor 2 over the desired character.
4. Press [}] (one-touch key 7) to enter the selected character into registration area.
The cursor 1 moves to the right.
5. Repeat steps 1-4 to finish writing a name.
To leave a blank space in the name, press number key [0].
To backspace the cursor 1, move the cursor 2 over the colon (:) and then
press [4] (one-touch key 6).
To advance the cursor 1 to the right, move the cursor 2 over the colon (:) and then
press [}] (one-touch key 7).
To erase a character, move the cursor 1 over the character to be erased, and then
press [DELETE] (one-touch key 8).