Installing The Recording Paper - Sanyo SFX-33 Service Manual

(4) Installing the recording paper
How to install the recording paper roll:
1. Press the [OPEN] button to open the recording paper
3. Pull out the end of the roll from the recording paper
cover.
exit until it extends 4 inches.
2. Place the supplied roll, in the direction shown in the 4. Close the recording paper cover by pressing both left
diagram, in the paper holder with both sides seated
and right corners of the far end of the cover firmly.
securely. The SFX-33 cuts the extra recording paper
Remove any slack from the roll.
automatically.
Inserl the end of the roll into the recording paper
exit slot.
Open button
Use only the recording paper specified for the SFX-33.
High-grade thermal paper
The SFX-33 is compatible with the high-grade thermal paper, a new type of fax recording paper with plain-paper
quality. Unlike regular thermal paper, the high-grade thermal paper does not fade with time, can be written on with
pencil and can be erased.
SANYO Type: 3RE21 82800450,216 mm (8.5") wide and 25 m (82') long.
Thermal paper
SANYO Type: R-4079448-1, 216 mm (8.5") wide and 30 m (98') long,
To purchase, contact your dealer.
Anti-curl system
The SFX-33 has a built-in anti-curl system that prevents thermal recording paper (high-grade or regular) from curling.
u
5