Set Date/Time - AT&T CL82115 User Manual

Telephone settings
Handset settings

Set date/time

The answering system announces the day and time of each
message prior to playing it. Before using the answering system,
set the date and time as follows. If you subscribe to caller ID
service, the day, month and time are set automatically with each
incoming call. The year must be set so that the day of the week
can be calculated from the caller ID information. You can turn
off the date and time settings of the caller ID service and set the
date and time manually (see Use caller ID to automatically set
date and time on page 24).
After a power failure or handset registration, the system prompts you
to set the date and time.
To set the date and time manually:
1. When the handset is in idle mode, press
MENU/
SELECT
2. Press
q
CID
and then press
3. Press q
CID
press
MENU
the dialing keys.
4. Press
q
CID
/SELECT, or enter the number using the
MENU
dialing keys.
5. Press q
CID
the number using the dialing keys, then press
/SELECT to move on to set the time.
MENU
6. Press
q
CID
/SELECT, or enter the number using the dialing keys.
MENU
7. Press q
CID
/SELECT, or enter the number using the dialing keys.
MENU
to enter the main menu.
or to scroll to Set date/time
p
DIR
/SELECT.
MENU
or p to select the month, then
DIR
/SELECT, or enter the number using
or to select the day, then press
p
DIR
or p to select the year, or enter
DIR
or to select the hour, then press
p
DIR
or p to select the minute, then press
DIR
16
Ringers
>Set date/time
SET DATE
MM/DD/YY
SET TIME
HH:MM --