Ptt Call To Multiple Devices - AT&T CL82115 User Manual

Multiple handset use
Push-to-talk (PTT)

PTT call to multiple devices

When there are multiple handsets registered to the phone system,
PTT supports one-to-group calls. PTT supports a maximum of
one-to-four calls when one to five handsets are registered, and
a maximum of one-to-three calls when six or more handsets are
registered. The first four registered handsets will be able to use this
feature. Other handsets can only use PTT for one-to-one calls.
To call multiple devices:
1. You have three ways to call multiple devices. When the handset is
not in use:
Press and hold PUSH TO TAL� until the handset shows
•
Connecting to group....
Press PUSH TO TAL�. Press q
•
Press
MENU
handset shows Connecting to group....
• Press PUSH TO TAL�. Press TONE followed by # (pound key).
The handset shows Connecting to group....
When the connection is made, both the caller and the destination
parties hear a beep. The speakerphones on all other devices
automatically activate.
2. You need to press and hold PUSH TO TAL� when you want to
speak. Speak towards the handset. Your voice is broadcast to
all devices.
3. Release PUSH TO TAL� after speaking.
4. Any extension can reply (see Answer a PTT call on page 43).
NOTE: After PUSH TO TAL� on the handset is released, the PTT call remains open
for a short time. If no one presses PUSH TO TAL� on the handset within ten
seconds, the PTT call ends automatically.
/SELECT or press PUSH TO TAL� and your
or p
CID DIR
42
to choose Group.