AT&T CL82115 User Manual page 79

Answering system
Answering system settings
To record a new outgoing announcement:
1. When the handset is in idle mode, press MENU/
the main menu.
2. Press q
CID
/SELECT.
MENU
3. Press
MENU
Announcement.
4. Press
MENU
system announces, "Record after the tone. Press
5 when you are done."
5. Speak towards the handset to record your announcement. Press
5 to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc
and press
MENU
To reset your outgoing announcement:
1. When the handset is in idle mode, press MENU/
the main menu.
2. Press q
CID
/SELECT.
MENU
3. Press Press
MENU
4. Press q
CID
/SELECT. The screen shows Reset to default annc?. Press
MENU
/SELECT again to confirm. The screen shows
MENU
Annc. reset to default before returning to the previous menu.
-OR-
Press q
CID
/SELECT. While the announcement is playing, press
MENU
/DELETE to delete the announcement. The screen shows
MUTE
Annc. Deleted before returning to the previous menu.
When your announcement is deleted, the system answers calls
with the default announcement described on page 71. You cannot
delete the default announcement.
or p to scroll to Answering sys, then press
DIR
/SELECT again to select
/SELECT to select Record annc. The
/SELECT.
or p to scroll to Answering sys, then press
DIR
/SELECT again to select Announcement.
or p
to scroll to Reset annc, then press
DIR
or p to scroll to Play annc, then press
DIR
72
to enter
SELECT
>Record annc
Play annc
to enter
SELECT
Press