FlexWaves FW-DOD User Manual page 7

The FLEX-DISTO has four mode of operation, selectable by pressing the Mode/ESC switch, the modes are:
FREE SET Mode (Manual), PRESET Mode, BANK Mode and LINK Mode.
FREE SET Mode (Manual)
When the power is turned on, the default pedal settings are Bypass („ – „ symbol on 7 Segments Display) and
FREE SET Mode.
Each "single" press of the On/Bypass footswitch turns the pedal on or off. When the effect is off ( „ –„ symbol on
display), the sound coming in through the IN Jack is True Bypassed to the OUT jack.
When the effect is on and FREE SET Mode („ Fr „on display ) the pedal plays according to the positions of the
controls.
1. Turn the Level knob to adjust the output level to feed your amp.
2. Turn the Drive knob to adjust the amount of overdrive/distortion of your sound.
3. Turn the Tone knob to shape your sound with darker or brighter tones.
7
OPERATION