Table of Contents
Advertisement
appears for a
few. It means you
are in Bank Save
1. From Bank Play Mode,
Hold On the footswitch to
change the Bank, release it
as you reach
.
stands for Bank Save.
15
OPERATION
Working with Banks – Save Mode
blinking. Select
the Bank.
appears on the display
1. Single Press on the
footswitch to change the
Bank to program.
2. Hold On the footswitch
to confirm the selection.
- blinking.
You must select which Preset to store
in the first position of Bank A.
flashes rapidly
1. Single press on the footswitch to
change Preset Number (you can
hear the Preset sound if you play).
2. Hold On the footswitch to
confirm
3. Repeats step 1 and 2 for the
other positions.You can choose
also - Bypass
4. To terminate the Sequence,
select (it stands for Sequence
END). To abort press MODE/ESC
Advertisement
Table of Contents
