FlexWaves FW-DOD User Manual page 16

The Bank Saving feature permits you to copy the presets into the bank and to organize your sounds for your gigs, your recording
sessions etc.
In the example below we will program the Bank D
1. Hold On the footswitch to change the Bank and release it when you reach
Saving Mode.
Please note that you can abort the operation pressing the MODE/ESC switch button.
2.  (with  flashing) will appear on the display. First thing you should do is to choose the Bank to program.
Single Press of the footswitch to change the bank selection, Hold ON the footswitch to confirm the selection.
In this example we will program the Bank D, so press S1 until you reach  (with  flashing) and Hold On the footswitch to
confirm.
3. Next thing you should do is to store the presets in the bank positions.
 ( flashing) appears on the display. It stands for Position 1 Bypass.
Single Press of the footswitch to change the Preset Number ( if you play you can hear the preset sound): - (Bypass), P1..P8
(Preset 1..8), E (sequence END) are the available choices.
4. Select Preset 1 on position 1 ( with flashing) and Hold On the footswitch to confirm it.
5. Now it will appear on the display (– with –flashing), repeat the step 4 to store into the bank the Preset 5, Preset 2 and
Bypass.
6. On the display it will appear now  (with – flashings), you have to terminate the sequence. Single Press of the footswitch
until you reach , E stands for End & Exit, Hold On the footswitch to confirm the sequence end.
7. The pedal automatically exits from Bank Saving Mode and enters in Bank Play Mode, so Bank A with first stored preset will
appear on the display.
16
OPERATION
Working with Banks – Saving Mode

with the presets 1,5,2,- (bypass)

(Bank Save). You entered in the Bank