FlexWaves FW-DOD User Manual page 18

LINK MODE (FW BALANCED CABLE LINK)
The FW BALANCED CABLE LINK MODE™ gives you the feature to use the FW Pedals like a pedalboard.
This feature is useful because you can recall the Presets of different FW pedals pressing just the footswitch of the first FW effect.
Flex Waves guitar pedals can be connected together by just a balanced/stereo cable (NO MIDI or other controller devices are
necessary) .
The first pedal of the chain becomes the Master and it controls the other FW effects (the Slaves).
With all pedals in Link Mode, just pressing the stomp switch S1 of the Master, it will change the preset in Link Bank of the Master
AND also the presets of all the Slaves linked together.
Warning
 Link Mode features are only available using Balanced/Stereo Cables to link the pedals. Mono Cables can be used but Link
Mode will not be available.
 The FW pedals must be linked one after the other to use the Link Mode features.
 For a correct usage of the Link Mode, you need to program the Link Bank of all FW pedals connected.
1. Link the FW Pedals with stereo cables in chain (you can buy them on Flex Waves website www.flexwaves.com)
The first pedal of the chain will become the Master.
2. Press the MODE/ESC switch on the FIRST SLAVE pedal (the second pedal connected) until your reach Free Set Mode,
repeat the operation for all the Slave connected (following the order from the first slave to the last slave).
3. Press the Mode Switch on the Master (the FIRST pedal of the chain) to enter in Link Mode from Bank Mode. Automatically
all the Slave pedals will change their mode to Link Mode.
4. Press the Stomp Switch S1 of the Master to change Link Bank Preset of the Master, automatically it will change the presets
of all linked slaves.
5. If a slave is ON, you can press its ON/Bypass footswitch for bypass.
18
OPERATION