Table of Contents
Advertisement
1. Press Mode Switch until you enter in BANK MODE:
means you entered in Bank A.
2.
(from default configuration) appears on the display, it means you entered in Bank A with Preset 1
loaded.
3. Single Press of the footswitch to change the bank position. By default the Bank A has been programmed
with Preset 1, Preset 2, Preset 3 and Preset 4, so if you continue to single press the footswitch, on the
display will appear
4. Hold On the footswitch to change the Bank, when you reach the desired Bank, release the footswitch.
5.
stands for Bank Save: it is a reserved Bank that lets you enter in Bank Saving Mode.
14
OPERATION
Working with Banks – Play Mode
,
,
,
appears on the display for few milliseconds, it
Advertisement
Table of Contents
