Operation - FlexWaves FW-DOD User Manual

The FW BALANCED CABLE LINK MODE™ gives you the total control of your sounds using only one footswitch. It‟s like having a
pedalboard.
17

OPERATION

The Link Mode (FW BALANCED CABLE LINK MODE™)
Program the Link Bank of all the effects (please read
Bank Save explanation).
1. Press Mode/Esc switch until you reach Free Set
(Manual) Mode on Slave1
2. Press Mode/Esc switch until you reach Free Set
(Manual) Mode on Slave 2
3. Press Mode/Esc switch until you reach Link Mode
All the slaves will automatically switch to Link Mode.
The Flex Waves pedals will load the Preset Number
associated to the first position of the Link Bank.
The first pedal of the chain is the Master and
it controls all the Flex Waves pedals of
the chain.
4. Single Press on the footswitch of the Master
to change the Preset Number associated to the
Bank Link in all every pedal of the chain. .
If a slave is ON, you can press its ON/Bypass
footswitch for bypass.
Total control of your sounds using only one
footswitch button.