Compass; Compass Calibration - Honda 2016 Accord Owner's Manual

Compass

*
When you turn the ignition switch to ON
compass display appears.

Compass Calibration

If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
* Not available on all models
*1 , the compass self-calibrates, and the
( w
1. Turn the ignition switch to ON
2. On the top screen of any audio source,
press and hold for five seconds.
u The display switches to the Compass
settings screen.
3. Select Calibration.
4. Select Calibration Start.
5. Drive the vehicle slowly in two circles.
u The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
I n f o r ma t i o n P r o v i d e d b y :
1Compass *
Compass operation can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
are mounted by magnets
( w *1 .
1Compass Calibration
Calibrate the compass in an open area.
While setting the compass, select
setting mode and return to the previous screen.
to cancel the
409