Table of Contents
Advertisement
Compass
*
Canadian models
Models without audio touch screen
When you turn the ignition switch to ON
compass display appears.
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
Compass Setting Menu Items
* Not available on all models
404
w , the compass self-calibrates, and the
(
1. Turn the ignition switch to ON
2. Press and hold the MENU button until the
display shows the compass setting menu
list.
3. Rotate
to select CALIBRATION, then
press
.
4. When the display changes to PUSH CAL
START, press
.
5. Drive the vehicle slowly in two circles.
u
The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
I n f o r ma t i o n P r o v i d e d b y :
1Compass
*
Compass operation can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
are mounted by magnets
1Compass Calibration
Calibrate the compass in an open area.
While setting the compass:
w .
(
•
The RETURN button returns to the previous screen.
•
The MENU button cancels the setting mode.
These indications are used to show how to operate
the selector knob.
Rotate
to select.
Press
to enter.
Advertisement
Chapters
Table of Contents
