uuIndicatorsu
Indicator
Name
System
Message
Indicator
*
Turn Signal
and Hazard
Warning
Indicators
High Beam
Indicator
Lights On
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
76
On/Blinking
Comes on for a few seconds when you
●
turn the ignition switch to ON
goes off.
Comes on along with a beep when a
●
problem is detected. A system message on
the multi-information display appears at
the same time.
Blinks when you operate the turn signal
●
lever.
Blink along with all turn signals when you
●
press the hazard warning button.
Comes on when the high beam headlights
●
are on.
Comes on whenever the light switch is on,
●
or in AUTO when the exterior lights are
on.
Explanation
While the indicator is on, press the
●
*1
, then
(
w
(information) button to see the
message again.
Refer to the Indicators information in
●
this chapter when a system message
appears on the multi-information
display. Take the appropriate action for
the message.
The multi-information display does not
●
return to the normal screen unless the
warning is canceled, or the
button is pressed.
Does not blink or blinks rapidly - A
●
turn signal light bulb has blown.
Change the bulb immediately.
2 Replacing Light Bulbs P. 531, 533,
534
If you remove the key from the ignition
●
switch
*1
while the exterior lights are on,
a chime sounds when the driver's door
is opened.
I n f o r ma t i o n P r o v i d e d b y :
Message
—
*
—
—
—
—