Turn Signals; Light Switches - Honda 2016 Accord Owner's Manual

uuOperating the Switches Around the Steering WheeluTurn Signals

Turn Signals

Right Turn
Left Turn

Light Switches

■
Manual Operation
High Beams
Flashing the high beams
Low Beams
Turns on parking, side marker,
tail, and rear license plate lights
Turns on headlights, parking, side
marker, tail, and rear license plate
lights
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
144
The turn signals can be used when the ignition
switch is in ON *1 .
w (
■
One-touch turn signal
When you lightly push up or down and release
the turn signal lever, the exterior turn signals
and turn signal indicator blink three times.
This feature can be used when signaling for a
lane change.
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch *1 .
■
High beams
Push the lever forward until you hear a click.
■
Low beams
When in high beams, pull the lever back to
return to low beams.
■
Flashing the high beams
Pull the lever back, and release it.
I n f o r ma t i o n P r o v i d e d b y :
1Light Switches
If you remove the key from the ignition switch while
the lights are on, a chime sounds when the driver's
door is opened.
When the lights are on, the lights on indicator in the
instrument panel will be on.
2 Lights On Indicator P. 76
If you sense that the level of the headlights is
abnormal, have the vehicle inspected by a dealer.
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.