Replacing Light Bulbs - Honda 2016 Accord Owner's Manual

Replacing Light Bulbs

Headlight Bulbs
When replacing, use the following bulbs.
High beam headlight: LED type
High beam headlight: 60 W (HB3 for halogen bulb type)
Low beam headlight: LED type
Low beam headlight: 55 W (H11 for halogen bulb type)
■
High Beam Headlights
Models with halogen headlights
Holding Clip
Tube
Holding Clips
* Not available on all models
*
*
*
*
Driver side
6-cylinder models
1. Unlock the holding clips, then remove the
upper part of the air intake duct and the air
intake tube.
Passenger side
All models
1. Remove the reserve tank.
I n f o r ma t i o n P r o v i d e d b y :
1Headlight Bulbs
Models with halogen headlights
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
All models
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the trunk or tow a trailer, have the
aiming readjusted at a dealer or by a qualified
technician.
Models with halogen headlights
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
1High Beam Headlights
Models with LED headlights
High beam headlights are LED type. Have an
authorized Honda dealer inspect and replace the light
assembly.
Continued 529