Yamaha YZFR3F Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
TRIP F → km/L or L/100 km → AVE_
_._ km/L or AVE_ _._ L/100 km → OIL
TRIP → ODO → TRIP 1 → TRIP 2 →
TRIP F
To reset a tripmeter, select it by push-
ing the "SEL" button, and then push
4
the "RES" button for at least one sec-
ond.
If you do not reset the fuel reserve trip-
meter manually, it resets itself auto-
matically and the display returns to the
prior mode after refueling and traveling
5 km (3 mi).
Instantaneous fuel
display
1. Instantaneous fuel consumption display
The instantaneous fuel consumption
display can be set to either "km/L" or
"L/100 km".
 "km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
 "L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
To switch between the instantaneous
fuel consumption displays, push the
"SEL" button for one second.
TIP
If traveling at speeds under 20 km/h
(12 mi/h), "_ _._" is displayed.
consumption
1
Average fuel consumption display
1. Average fuel consumption display
The average fuel consumption display
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km".
This display shows the average fuel
consumption since it was last reset.
 "AVE_ _._ km/L": The average dis-
 "AVE_ _._ L/100 km": The average
To switch between the average fuel
consumption displays, push the "SEL"
button for one second.
To reset the average fuel consumption
display, push the "RES" button for at
least one second.
4-7
1
tance that can be traveled on 1.0 L
of fuel is shown.
amount of fuel necessary to travel
100 km is shown.