Yamaha YZFR3F Owner's Manual page 20

INSTRUMENT AND CONTROL FUNCTIONS
is correct, immediately turn the en-
gine off and have a Yamaha dealer
check the vehicle.
TIP
If the warning light does not go off after
starting the engine, check the engine
oil level and add oil if necessary. (See
4
page 7-10.)
If the warning light remains on after
adding engine oil, have a Yamaha
dealer check the vehicle.
Engine trouble warning light "
This warning light comes on or flashes
if a problem is detected in the electrical
circuit monitoring the engine. If this oc-
curs, have a Yamaha dealer check the
self-diagnosis system. (See page 4-10
for an explanation of the self-diagnosis
device.)
The electrical circuit of the warning
light can be checked by turning the key
to " ". The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to "
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
TIP
The engine trouble warning light will
come on while the start switch is
pushed, but this does not indicate a
malfunction.
Shift timing indicator light
EAU62790 This indicator light can be set to come
"
on and go off at the desired engine
speeds and is used to inform the rider
when it is time to shift to the next high-
er gear. (See page 4-8 for a more de-
tailed explanation of this indicator light
and on how to set it.)
The electrical circuit of the indicator
light can be checked by turning the key
to " ". The indicator light should
come on for a few seconds, and then
go off.
If the indicator light does not come on
", initially when the key is turned to "
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
EAU62470
4-3
",