If the last segment on the right flashes,
stop the vehicle, then stop the engine,
and let the engine cool. (See page
7-42.)
NOTICE
Do not continue to operate the en-
gine if it is overheating.
TIP
The coolant temperature varies with
changes in the weather and engine
load.
Transmission gear display
1. Neutral indicator light "
"
2. Transmission gear display
INSTRUMENT AND CONTROL FUNCTIONS
This display shows the selected gear.
The neutral position is indicated by " "
and by the neutral indicator light.
Multi-function display
ECA10022
1. Multi-function display
The multi-function display is equipped
with the following:
an odometer
two tripmeters
a fuel reserve tripmeter
an instantaneous fuel consump-
tion display
an average fuel consumption dis-
play
an oil change tripmeter
an oil change indicator
Push the "SEL" button to switch the
display between the odometer mode
"ODO", tripmeter modes "TRIP 1" and
"TRIP 2", instantaneous fuel consump-
tion mode "km/L" or "L/100 km", aver-
age fuel consumption mode "AVE_ _._
1
km/L" or "AVE_ _._ L/100 km" and oil
change tripmeter mode "OIL TRIP" in
the following order:
ODO → TRIP 1 → TRIP 2 → km/L or
L/100 km → AVE_ _._ km/L or AVE_ _._
L/100 km → OIL TRIP → ODO
If the left segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter mode "TRIP F" and starts
counting the distance traveled from
that point. In that case, push the "SEL"
button to switch the display between
the various tripmeter, odometer, in-
stantaneous fuel consumption and av-
erage fuel consumption modes in the
following order:
4-6
4