Setting Up Internet Connection - BenQ RP652 User Manual

28 Basic operations

Setting up Internet connection

Your display must be connected to the network to download updates or surf the
Internet.
To find the MAC address in Android OS, please go to Settings > Network > Status.
Wired Connection
1. Connect one end of the Ethernet cable to the LAN port of the display.
2. Connect the other end of the Ethernet cable to the LAN port of the router.
3. Press the INPUT button on the remote control and select ANDROID.
4. On the home screen, select All Apps (
5. In the Network menu, select Wired.
6. In the Wired menu, set Open Ethernet to On to configure the network settings.
Then do the following:
- If the router setting enables obtaining IP address automatically, select The
Automatic Acquisition IP Address and press the OK button. Your display will
obtain the IP address automatically.
- Otherwise, do the following to manually configure the network:
a. Select IPv6 and press the OK button to enable/disable IPv6.
b. Select IP Address and assign a valid IP address for the device.
c. Select Subnet Mask and assign a subnet mask of the IP address for the device.
d. Select Default Gateway and assign a valid gateway for the device.
e. Select First DNS and Second DNS, and then assign a valid DNS server
address for the device.
f. Select save and press the OK button. A successful message appears on the
screen.
Wireless Connection
This display only supports BenQ WDRT8192 WiFi dongle. Please contact your local
dealer for more information on configuring the wireless connection.
) > Settings ( ) > Network.