Connecting The Touch Module - BenQ RP652 User Manual

Connecting the multimedia inputs
To view multimedia files on the USB flash drive:
1. Plug the USB flash drive in the M-USB port.
2. A dialog box appears on the screen. Select Ok to enter the multimedia mode.
USB flash drive
The cables are not supplied and should be purchased separately.

Connecting the touch module

Connect the USB TYPE A FOR TOUCH (type A) jack (TOUCH USB 1 or TOUCH
USB-2) on the display to the USB port of a computer using the supplied USB cable. The
touch module of the display supports easy Plug-and-Play operation. There is no need to
install additional drivers on the computer.
• Avoid blocking the touch screen frame (where sensors are located) when initiating the touch
module.
• It is highly recommended that you connect the display to the PC or laptop directly. Avoid
connecting the display to a face plate device which may cause failures in touch operations.
• If any ghost image occurs, please try to unplug and then re-plug all USB cables. If the failure
image still exists, use another USB type A to A cable.
• TOUCH USB 1 must be used with HDMI 1, and TOUCH USB-2 must be used with VGA,
HDMI 2, HDMI 3, HDMI 4, or HDMI 5.
USB cable
Computer
Connection 19