Answer An Incoming Call During An Intercom Call; Call Transfer Using Intercom - VTech CS6859 User Manual

- OR -
To end the intercom call on the
destination handset, press OFF
or place the handset back in the
telephone base or charger. Both
devices display Intercom ended
NOTES
• If you do not have any handset registered
to the telephone base, you will hear
two beeps when you press INT on the
telephone base.
• You can cancel the intercom call before it
is answered by pressing CANCEL or INT.
• If the destination handset does not answer
the intercom call within 100 seconds, is
accessing the answering system, on a
call or out of range, the telephone base
displays Unable to call and returns to
idle mode.
Answer an incoming call during
an intercom call
When you receive an outside call during
an intercom call, there is an alert tone.
To answer on a cordless handset:
• To answer the call, press
intercom call ends automatically.
• To end the intercom call without
answering the call, press OFF. The
intercom call ends and the telephone
continues to ring.
To answer at the telephone base:
• To answer the call, press
/SPEAKER twice. The intercom call
ends automatically.
• To end the intercom call without
answering the call, press
/SPEAKER. The intercom call ends
and the telephone continue to ring.

Call transfer using intercom

Use the intercom feature to transfer an
outside call from one device to another.
During a call, press INT on your
1.
handset or telephone base
.
•
•
The destination device rings and its
screen displays HS X is calling or
Base is calling.
2. To answer the intercom call on the
destination handset, press
or any dialing key (0-9,
Both handsets now display Intercom
. The
- OR -
To answer the intercom call at the
telephone base, press
INT or any dialing key (0-9,
Intercom
The outside call is still on hold and
both devices now display Intercom.
You can now have a private
conversation with the destination
device.
NOTES
• To cancel the intercom call before it is
answered, press
handset, or press
the telephone base.
16
If you have one handset, the
outside call is put on hold and your
handset displays Calling base
or the telephone base displays
Calling HS 1.
If you have two or more handsets,
your handset/telephone base
displays Intercom to/Intercom to:
Press 7 for the telephone base or
1-5 for HANDSET 1 or
HANDSET 5. Your handset displays
Calling base or Calling HS X.
) . Both devices now display
.
OFF
/SPEAKER or
, INT
,
, or ) .
/SPEAKER,
, or
INT
, or on your
INT
on
.