INTRODUCTION The IW-S7 and IW-T7 in-wall speakers are designed to be as accurate, clean and musical as our free-standing speakers. The unobtrusive, fl ush-mount design makes them ideal for installation in walls or ceilings of rooms where space or decor make conventional speakers undesirable or inappropriate.
Page 4
WHERE TO PLACE YOUR SPEAKER SYSTEMS Effects Of The Wall The wall or ceiling into which the IW in-wall speaker is placed becomes its acoustical enclosure. A large part of the system’s acoustical performance is dependent on that enclosure. Generally, large volumes will ensure full bass extension.
In all cases, make certain that the total impedance does not fall below the amplifi er’s minimum rating. If you are not sure, contact your Snell Acoustics dealer. IW-S7 - T7 Manual.indd 5 IW-S7 - T7 Manual.indd 5...
Prepare the speaker/bracket assembly for in- stallation as shown. For new construction, an optional bracket (Model NCB8 for the IW-S7, Model NCB6 for the IW-T7) is available from your Snell Acoustics dealer. WARNING: To prevent electrical shock hazard, always switch off the amplifi er or receiver when making connections to the speaker.
Use such controls sparingly. LIMITED WARRANTY For fi ve years from the date of purchase, Snell Acoustics will repair for the original owner any defect in materials or workmanship that occurs in normal use of the speaker system, without charge for parts and labor.
Need help?
Do you have a question about the IW-T7 and is the answer not in the manual?
Questions and answers