Sony KDL-52Z4500 Operating Instructions Manual page 38

Photo Colour Space Selects an option (sRGB, sYCC, Adobe RGB) to set the picture quality best suited
Timer Settings
Set-up
Auto Start-up
Region (Australian
model only)
Screen Settings
38
GB
to the colour space of the photograph.
If equipment converts the output colour space of a photograph from sYCC or
Adobe RGB to x.v.Colour or xvYCC, select "sYCC". Results in picture quality
best suited to the original colour space.
If an RGB signal is being input through HDMI input, automatically set to "sRGB"
even if you have selected "sYCC".
~
• Select "sYCC" when using the equipment that supports "x.v.Colour".
• Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 1080i
or 1080p.
• Not available when "Colour Space" is set to "Wide" (page 35).
Sets the timer to turn on/off the TV.
Sleep Timer Sets the TV to automatically switch to standby mode after a
certain amount of time.
When "Sleep Timer" is activated, the
the TV front panel lights up in orange.
z
• When you turn off the TV and turn it on again, "Sleep
Timer" is reset to "Off".
• A notification message appears on the screen one minute
before the TV switches to standby mode.
On Timer On Timer
Settings
Timer Mode
Time
Duration
Time Adjustment When digital channels have been received, set this to "Auto"
to adjust the clock automatically. If no digital channels have
been received, set this to "Manual", and adjust the clock
manually in "Clock Set".
Clock Set Allows you to adjust the clock manually. When the TV is
receiving digital channels, you cannot adjust the clock
manually, because the clock automatically receives the time
code from the broadcast signal.
You can run the initial set-up that appeared when you first connected the TV
(page 6), and select the region (Australian model only) and tune in all available
channels again.
Even if you have made the settings when you first connected the TV, you may need
to change the settings after moving house, or to search for newly launched
channels.
Sets the region in which you will operate the TV.
Wide Mode
See "To change the Wide Mode manually" on page 16.
(Timer) indicator on
Sets the TV to automatically turn on from
standby mode.
Sets the desired day(s) of the week you
want the timer to turn on the TV.
Sets the time you want the timer to turn
on the TV.
Sets how long you want the TV to stay on
before switching to standby mode again.