Sony KDL-52Z4500 Operating Instructions Manual page 20

Connect to
1 USB
2 HDMI IN 2
HDMI IN 1 or 3
3
2, and 2
4 i Headphones
5 1 or 1 or
3, and 1 or 3
6 /
7
/ 1 or 2
20
GB
Input symbol on Description
screen
You can enjoy photo/music files stored in a Sony digital still
camera or camcorder through a USB cable or USB storage
device on your TV (page 23).
HDMI 2
The digital video and audio signals are input from the
HDMI 1 or equipment.
HDMI 3 In addition, when you connect the equipment that is
compatible with control for HDMI, communication with the
connected equipment is supported. Refer to page 40 to set up
this communication.
If the equipment has a DVI jack, connect the DVI jack to the
HDMI IN 3 jack through a DVI - HDMI adaptor interface
(not supplied), and connect the equipment's audio out jack to
the audio in jack in the HDMI IN 3 jacks.
~
• The HDMI jacks only support the following video inputs:
• Be sure to use only an authorised HDMI cable bearing the
• When connecting an audio system with HDMI jack, be sure
Video 2 If you connect mono equipment, connect to the
You can listen to sound from the TV on headphones.
Video 1 or To avoid picture noise, do not connect the camcorder to the
Video 3 video jack
If you connect mono equipment, connect to the L(MONO)
jack
Use to record the analogue video and sound from TV to a
DVD recorder or VCR. To turn off the sound of the TV
speakers, set "Speaker" to "Audio System" (page 40). If you
connect mono equipment, connect to the L jack
~
• The monitor output jacks cannot support HD/DVD, HDMI
HD/DVD 1 or For better picture quality, component connection is
HD/DVD 2
recommended if your DVD player has a component video
output.
480i, 480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p.
HDMI logo. We recommend that you use a Sony HDMI
cable (high speed type).
to also connect to the audio output jacks
sound from the TV on audio system.
1 and the S video jack
1 or 3.
and PC signals source pictures, also digital audio signal for
sound.
to listen to the
2 L jack.
1 at the same time.
.