Ports 1-8 (G.shdsl Ports); Power Port - ZyXEL Communications IES-1000 User Manual

serial port (COM1, COM2 or other COM port) of your computer. You can use an extension cable if the enclosed
one is too short. After the initial setup, you can modify the configuration remotely through Telnet.
2.3.3

Ports 1-8 (G.SHDSL Ports)

To complete a G.SHDSL connection, connect a telephone line from the user equipment to one of the SHDSL ports
on the SAM1008.
2.3.4

POWER Port

Connect the female end of the power cord to the power receptacle on the front panel of your IES-1000. Connect
the other end of the cord to a power outlet. Make sure that no objects obstruct the airflow of the fans. If you are
facing the IES-1000 front panel, the fan vents are located on the left side of the unit.
Hardware Overview
Make sure you are using the correct power source.
IES-1000 User's Guide
2-3