Interior Light - Gaggenau RW 404 Operating Instructions Manual

3. Again pressing the fan button confirms the flashing
h" value; you can now set the interior lighting /
display luminosity.
The current luminosity value is displayed: h1" for
min luminosity, h5" for max luminosity.
4. Pressing the + and - buttons changes the value
h..." for the luminosity.
5. Again pressing the fan button confirms the changed
value.
6. Pressing the on/off button ends setting mode.
Here too, setting mode is ended automatically
after about two minutes.
26

Interior light

Integrated in the top and bottom compartments is
a lighting strip with SoftTouch effect.
Caution! Class 1M laser lighting. Do not look directly into
the lighting with optical instruments. Risk of eye injury!
Only customer service or authorised qualified personnel
may conduct repairs on laser installations.
When the door is opened the brightness is slowly raised
from 0 to the set max luminosity. When the door is
closed the effect runs in reverse.
Adjusting the lighting brightness:
Press the on/off button for the interior lighting.
D
Keep the interior lighting button pressed, at the same
D
time setting the interior lighting to a brighter or darker
value at the + or - button respectively.
Minus = darker, Plus = brighter.
The interior lighting can also be switched on permanently
for presentation purposes.
To do so, press the interior lighting button.
D
Again pressing the interior lighting button deactivates
D
permanent lighting.