NETGEAR ProSAFE M5300 Series Software Administration Manual page 511

A screen similar to the following displays.
b. Under Port PVID Configuration, scroll down and select the 1/0/1 check box.
c. In the PVID (1 to 4093) field, enter 200.
d. Click Apply to save the settings.
4. Create a new DHCP pool.
a. Select System > Services > DHCP Server > DHCP Server Configuration.
A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply to enable the DHCP service.
d. Select System > Services > DHCP Server > DHCP Pool Configuration.
A screen similar to the following displays.
Managed Switches
DHCP Server
511