NETGEAR ProSAFE M5300 Series Software Administration Manual page 392
Managed switches
Hide thumbs
Also See for ProSAFE M5300 Series:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- User manual (764 pages)
Table of Contents
Advertisement
2.
Enable the logging of invalid packets for port 1/0/27.
a. Select Security > Control > DHCP Snooping > Interface Configuration.
A screen similar to the following displays.
b. Select the 1/0/27 check box.
c. In the Invalid Packets field, select Enable.
d. Click Apply.
3.
Determine the IP address and MAC address for the rogue DHCP server:
a. Select Monitoring > Logs > Logs > Buffered logs.
A screen similar to the following displays.
b. Search for "DHCP packet; op Reply".
In the previous figure, the IP address of the DHCP server is 10.100.5.253 and the
MAC address is 00:26:F2:F6:B3:6C.
Managed Switches
Security Management
392
Advertisement
Table of Contents
