Web Interface: Renumber Stack Members - NETGEAR ProSAFE M5300 Series Software Administration Manual
Managed switches
Hide thumbs
Also See for ProSAFE M5300 Series:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- User manual (764 pages)
Table of Contents
Advertisement
Web Interface: Renumber Stack Members
1.
Renumber the stacking member's ID from 3 to 2.
a. Select System > Management > Basic > Stack Configuration.
A screen similar to the following displays.
b. Scroll down and select the 3 check box.
c. In the Change Switch ID to field, enter 2.
d. Click Apply to save the settings.
Now, the unit ID of the stacking member is 2.
Managed Switches
Switch Stacks
493
Advertisement
Table of Contents
