Sony LMD-2451W Operating Instructions Manual page 15

A A
B
A
– +
B
A: Screw holes for low position
B: Screw holes for high position
3
Attach the stand attachment bracket with four
screws.
Use the screws removed in step 5 of "To remove the
stand attachment bracket".
4
Attach the arm.
Hang the hook of the bracket for using
the A screw holes.
A A A A
B B B B
– +
A A
B B
5
Secure the arm with four screws.
Use the screws removed in step 3 of "To remove the
stand attachment bracket".
6
Attach the arm cover.
To align the lower part of the LMD-2451W and
LMD-2051W display
Use the A screw holes for the LMD-2451W and the B
screw holes for the LMD-2051W display when you
attach the arm in step 4 above.
A A
B
A
B
A A
B B
Hang the hook of
the bracket for
using the B screw
holes.
These screws are used for each display at the factory.
To remove the stand attachment bracket
1
Put the monitor on a soft cloth with the surface of
the LCD monitor downward.
2
Slide and remove the arm cover of the stand.
3
Remove four screws.
4
Remove the arm.
5
Remove four screws to remove the stand
attachment bracket.
2
3
+
–
+
+
– –
+ +
–
–
+
+
–
–
+
+
–
– +
–
+
+
–
–
4
5
1
Adjusting the Height of the Stand
15