Sony LMD-2451W Operating Instructions Manual page 36

General
Power LMD-2451W: AC 100 V to 240 V, 50/
60 Hz, 1.5 A to 0.7 A
DC 24 V, 5.7 A
LMD-2051W: AC 100 V to 240 V, 50/
60 Hz, 0.8 A to 0.4 A
DC 24 V, 3.3 A
LMD-1751W: AC 100 V to 240 V, 50/
60 Hz, 0.8 A to 0.4 A
DC 12 V, 5.7 A
Power consumption
LMD-2451W: Maximum: approx.
130 W (when two BKM-229X are
installed)
LMD-2051W: Maximum: approx. 95
W (when two BKM-229X are
installed)
LMD-1751W: Maximum: approx.
77 W (when two BKM-229X are
installed)
Peak inrush current
LMD-2451W:
(1) Power ON, current probe method:
23 A (100 V), 56 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
55 A (230 V)
LMD-2051W:
(1) Power ON, current probe method:
16 A (100 V), 34 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
36 A (230 V)
LMD-1751W:
(1) Power ON, current probe method:
17 A (100 V), 26 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
38 A (230 V)
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30% to 85% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature
–20 °C to + 60 °C (–4 °F to +140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC plug holder (1)
36
Specifications
Operating Instructions (1)
CD-ROM (1)
Using the CD-ROM Manual (1)
Optional accessories
SDI 4:2:2 input adaptor
BKM-220D
HD/D1-SDI input adaptor
BKM-243HS
NTSC/PAL input adaptor
BKM-227W
Analog component input adaptor
BKM-229X
HD/SD-SDI closed caption adaptor
BKM-244CC
3G/HD/SD-SDI input adaptor
BKM-250TG
Mounting bracket
MB-529 (for LMD-2051W)
MB-530 (for LMD-1751W)
Monitor stand
SU-561 (for LMD-1751W)
Design and specifications are subject to change without
notice.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE LOSS
OF PRESENT OR PROSPECTIVE PROFITS DUE
TO FAILURE OF THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR ANY
OTHER REASON WHATSOEVER.
Pin assignment
PARALLEL REMOTE connector
Modular connector
(8-pin)
Pin number Functions
1 Designating composite input signal
2 Designating component input signal
3 Setting tally lamp green ON/OFF
4 Setting tally lamp red ON/OFF
5 GND
6 Selecting external sync
7 Selecting over scan
8 Selecting normal scan
1 8