Sensor (Media Level) Removal - Lexmark W840 Service Manual

Sensor (media level) removal

1.
Remove the appropriate media feed unit assembly. See
page 4-19
2.
Disconnect the connector from the sensor (media level) (A).
3.
Release the hooks securing the sensor (media level) (A) to the media feed unit.
4.
Remove the sensor (media level) (A).
or "Media feed unit assembly 2 removal" on page
Harness
Hooks
"Media feed unit assembly 1 removal" on
4-22.
Front
A
Lower view
4024-XXX
4-37
Repair information