Stihl SR 200 Instruction Manual page 15

3 1
Line up the hose clamp (1) and slip
N
ring (3):
the two lugs (arrow) on the slip ring
–
face up.
The hose clamp's hook faces
–
outwards.
Tighten down the screw (arrow).
N
Mounting the Control Handle
3
Open up the control handle (1) with
N
liner (2) and push it over the stub (3)
of the pleated hose.
SR 200
Attach throttle cable to retainer (4).
N
Secure hose with retainer (5) to
N
third pleat (arrow) in pleated hose.
Mounting the Blower Tube and Nozzle
2
Push the blower tube (1) into the
N
stub of pleated hose (2) as far as
the stop.
Push the nozzle (3) onto blower
N
tube as far as stop – metering
knob (4) must be in line with the
control handle.
2
Adjusting and Securing the Control
Handle
1
Put the machine on your back and
N
adjust the harness – see "Harness".
5
4
Slide the control handle (1) along
N
the tube to the most comfortable
position – distance between nozzle
outlet (2) and the control handle (1)
must be at least 500 mm (20 in) (a).
4
1 3
Secure the hose clamp (1) with the
N
screw (3).
English
a
1
2
1
3
13