Cleaning The Air Filter; Engine Management - Stihl SR 200 Instruction Manual

Cleaning the Air Filter

If there is a noticeable loss of engine
power
1
Turn the filter cover lock (1)
N
counterclockwise to the vertical
position.
4
3
Remove the filter cover (2).
N
Clean away loose dirt from around
N
the filter.
Pull off the adapter (3) and remove
N
the filter (4).
Fit a new filter element. As a
N
temporary measure you can knock it
out on the palm of your hand or blow
it out with compressed air. Do not
wash.
Replace any damaged parts.
SR 200
Install the filter element.
Fit the filter in the filter housing and
N
push the retainer into position.
Refit the filter cover and turn the
N
filter cover lock to the horizontal
position
2

Engine Management

Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
English
25