Charging The Unit - iHome iBT32 Instruction Manual

Charging the Unit

CHARGE UNIT BEFORE USE
1. Connect the micro USB plug on the included charging cable to the micro USB POWER IN charging
port on the bottom of the unit.
NOTE: ONLY use the included charging cable with USB adaptor to charge the iBT32.
Charge via included USB AC adaptor
USB Adaptor
NOTE: The white Status Indicator Lights on the top front of the unit are
activated when the unit is ON or when connected to a charging source via
the USB cable.
2. Connect the standard USB plug end of the charging cable to the included USB adaptor and plug into
a working outlet. For first time use, charge unit for about 8 hours.
3. The Status Indicator Lights on the top front of the unit flash while the unit is charging and turn solid
once the unit is fully charged. See table above for charge status information.
iHome iBT32 USB port
5
iBT32
Using the
Battery Charge Status
(unit is ON)
Dead, needs charging
16 - 30% charged,
needs charging
31 - 45% charged
46 - 60% charged
61 - 85% charged
86 -100% charged