Charging The Unit - iHome iBT8080 Instruction Manual

Getting Started: Carry Strap
The iBT8080 has two channels to attach the
included carry strap, one on the bottom to hang
the unit like a lantern, and one on the lower back
of the unit. To attach the carry strap, form a small
loop in one end of the carry strap. Insert this loop
through the desired channel, then pull the
loop back through the larger loop formed in the
carry strap to tighten.

Charging the Unit

CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING
1. Connect the micro USB plug on the included combination cable to the
micro USB Charging/Aux-in USB Port on the side of the unit.
2. Connect the standard USB plug end of the cable to a power USB port
on a computer, a USB AC adaptor or other USB charging device. For
first time use, charge unit for about 4 hours. The status indicator LED
on top of the unit turns solid red while charging and turns o once unit
is fully charged.
Charge via computer USB port, USB AC adaptor or other powered USB port
Computer
connected to
working outlet
Computer USB port
USB AC adaptor
(not included)
USB AC adaptor
connected to working outlet
iBT8080
iHome iBT80 USB port
iHome iBT80 USB port
OR
4