Charging Devices Via Usb Port - iHome iBT32 Instruction Manual

Charging Devices via USB Out Port
Note: When operating on internal battery, the unit must be powered ON to charge devices via the USB
Out Port. The iBT32 can charge devices while the iBT32 is charging via the micro USB POWER
IN Port OR when operating on the internal battery (provided the battery has enough charge). To
charge devices via USB Out Port while operating on the internal battery, we recommend that the
unit be fully charged first. The iBT32 will not charge external devices via USB Out Port when
internal rechargeable battery is too low (single indicator is blinking or no indicator). To save battery
power, USB Out charging is limited to 1 hour when no audio is playing.
1. Lift water resistant seal located on the bottom of the unit to expose the USB Out Port.
2. Connect the standard size end of a USB cable (not included) to the USB Out Port and connect the
other end to the charging port on your device.
3. Press and hold the
4. Monitor the charging on your device. If your device does not charge, you must charge your device
using the charger that came with it.
Note: When charging the iBT32, use the supplied 1A USB AC
adaptor and charging cable to ensure external device
charging. External device charging will not be activated when
the iBT32 is being charged at lower power.
.
Power Button on the unit to turn it on.
Using the
10
iBT32