Tire Rotation - GMC Canyon 2016 Owner's Manual

Replace the tire if:
The indicators at three or
more places around the tire
can be seen.
There is cord or fabric
showing through the tire's
rubber.
The tread or sidewall is
cracked, cut, or snagged
deep enough to show cord or
fabric.
The tire has a bump, bulge,
or split.
The tire has a puncture, cut,
or other damage that cannot
be repaired well because of
the size or location of the
damage.

Tire Rotation

Tires should be rotated every
12 000 km (7,500 mi). See
Maintenance Schedule 0 341
Tires are rotated to achieve a
uniform wear for all tires. The
first rotation is the most
important.
Anytime unusual wear is
noticed, rotate the tires as soon
as possible, check for proper tire
inflation pressure, and check for
damaged tires or wheels. If the
unusual wear continues after the
rotation, check the wheel
alignment. See When It Is Time
for New Tires 0 306
Replacement 0 310
.
ii
Use this rotation pattern when
rotating the tires.
Do not include the spare tire in
the tire rotation.
Adjust the front and rear tires to
the recommended inflation
pressure on the Tire and
Loading Information label after
the tires have been rotated. See
Tire Pressure 0 299
Load Limits 0 204
Reset the Tire Pressure Monitor
and Wheel
ii
System. See Tire Pressure
.
ii
Monitor Operation 0 301
Check that all wheel nuts are
properly tightened. See Wheel
Nut Torque under Capacities
and Specifications 0 355
Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
Vehicle Care 305
and Vehicle
ii
.
ii
.
ii
.
ii
Warning
(Continued)