GMC Canyon 2016 Owner's Manual page 88

Warning (Continued)
drive until the head restraints for
all occupants are installed and
adjusted properly.
Crew Cab
The rear outboard head restraints
can be removed if they interfere with
the proper installation of the child
restraint.
To remove the head restraint:
1. Partially fold the seat forward.
2. Press the button on the side of
the head restraint post at the
top of the seatback and pull up
on the head restraint.
3. Store the head restraint in the
storage compartment under the
left rear seat cushion. See
Underseat Storage 0 99
4. Always reinstall the head
restraint before the seating
position is used by another
occupant.
To reinstall the head restraint:
Seats and Restraints
1. Insert the posts into the holes
in the top of the seatback. The
notch on the post should face
the driver side of the vehicle.
2. Push the head restraint down.
Pull up on the head restraint to
make sure it is locked in place.
.
Extended Cab
ii
To remove the headrest:
1. Press the button on the side of
the headrest post on the top of
the seatback and pull up.
87