GMC Canyon 2016 Owner's Manual page 86

Hide thumbs Also See for Canyon 2016:
Table of Contents

Advertisement

5. Attach and tighten the lower
attachments to the lower
anchors. If the child restraint
does not have lower
attachments, secure the child
restraint with the safety belts
and the top tether (if
appropriate). See Securing
Child Restraints (Rear Seat)
0 89
or Securing Child
ii
Restraints (Front Passenger
Seat) 0 95
.
ii
6. Tighten the top tether. The
child restraint instructions will
show you how.
7. Before placing a child in the
child restraint, make sure it is
securely held in place. To
check, grasp the child restraint
at the LATCH path and attempt
to move it side to side and
back and forth. There should
be no more than 2.5 cm (1 in) of
movement for proper
installation.
8. Always reinstall the headrest
before the seating position is
used by another occupant. See
Head Restraint/Headrest
Removal and Reinstallation at
the end of this section.
Extended Cab without Rear
Seats
Warning
A child in a rear-facing child
restraint can be seriously injured
or killed if the right front
passenger airbag inflates. This is
because the back of the
rear-facing child restraint would
be very close to the inflating
airbag. A child in a forward-facing
child restraint can be seriously
injured or killed if the right front
passenger airbag inflates and the
passenger seat is in a forward
position.
Even if the passenger sensing
system has turned off the right
front passenger frontal airbag, no
system is fail-safe. No one can
guarantee that an airbag will not
(Continued)
Seats and Restraints
Warning (Continued)
deploy under some unusual
circumstance, even though it is
turned off.
Since this vehicle does not have
a rear seat that will accommodate
a rear-facing child restraint, a
rear-facing child restraint should
not be installed in your vehicle,
even if the airbag is off.
See Passenger Sensing System
0 62
for additional information.
ii
The vehicle has a front outboard
passenger frontal airbag and a
passenger sensing system. The
passenger sensing system is
designed to turn off the front
passenger frontal airbag when an
infant in a rear-facing infant seat or
a small child in a forward-facing
child restraint or booster seat is
detected. See Securing Child
Restraints (Front Passenger Seat)
later in this section and Passenger
Sensing System 0 62
for important
ii
safety information and additional
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents