Empty The Dirty Water Tank; Carry Handle - Dirt Devil DDW03-E01 User Manual

EmPTY THE DIRTY WATER TANk

1. Lift dirt water tank by

carry handle.

4. Empty dirty water
over the sink. Rinse dirty
water tank and lid under
water to remove debris.
IMPORTANT: If the hose or tools are blocked, switch off the carpet washer and remove the blockage(s)
before re-starting your machine.
IMPORTANT: Empty and rinse out clean and dirty water tanks and leave to air dry before replacing.
Do not leave solution/water stored in the tanks between uses.
14
2. Pull to remove dirty
water tank.
5. Clean the filter screen
located at the back of
the dirty water tank.
CAUTIon
Always switch off and unplug the
carpet washer from the mains before
assembling, filling and emptying the
clean water tank, emptying the dirty
water tank or before connecting or
disconnecting the attachments.
3. Lift dirty water tank
clip up and outward to
release.