Dirt Devil DDW03-E01 User Manual page 18

If a minor problem occurs, it usually can be solved quite easily when
the cause is found by using the checklist below. If not please call the
Customer Care Line on 0330 026 2626.
TO REDUCE THE RISk OF PERSONAl INjURY -
Problem
Why won't the
carpet washer turn
on?
Why won't the
cleaner pick up
solution/spills?
Why won't the
solution/clean
water dispense?
Why won't the
brushes rotate?
18
CAUTIon
UNPlUg BEFORE ClEANINg OR SERvICINg.
It may not be plugged into the mains correctly: ensure that the plug is
pushed in securely and switched on.
The power button on the carpet washer may not be fully depressed.
If the carpet washer cuts out during use, disconnect from the electrical
socket, allow to cool for one hour, empty the dirty water tank, clean the
filter and check hose and Power Scrub brushes for blockages.
The float in the dirty water tank may have been activated. Empty the
dirty water tank if full. If the dirty water tank is not full then switch the
carpet washer off and wait for the float to settle before re-starting your
machine.
The dirty water tank may be full and the auto shut off engaged.
Empty the dirty water tank.
Ensure the dirty water tank is fitted correctly and the cover on the
hose connection port is closed.
Check the nozzle is fitted correctly and for blockages.
Check the Power Scrub brushes for blockages.
Check the hose for blockages.
Make sure the clean water tank is fitted securely.
The solution/clean water tank may be empty.
Check the carpet washer is on the correct setting no water will be
dispensed when using the Max Extract mode.
No water will be dispensed on 'rinse 'or 'max extract' mode when
using the hose.
The brushes will only rotate when the carpet washer is reclined and
turned on.
Check the lint filter and clean if necessary.
The brushes will not rotate when set in the Max Extract mode.
Possible Solution