Clean The Base Lint Filter - Dirt Devil DDW03-E01 User Manual

CAUTIon
Always unplug the carpet washer before performing any maintenance/troubleshooting checks. All water and solution
must be removed from tanks.

ClEAN THE BASE lINT FIlTER

1. Lie carpet washer on its
back. The filter is located
behind the brushes.
ClEAN THE NOzzlE
1. Remove dirty water
tank. Lift and pull top of
nozzle to remove.
2. Pull filter to remove.
4. Leave to dry for 24
hours or until fully dry
before placing back in
the carpet washer.
2. Rinse nozzle under
water to remove debris.
3. Rinse filter under
water to remove debris.
3. Line up tabs on nozzle with
holes in carpet washer. Slide
tabs into holes, press down on
nozzle until clicks into place.
15