Dirt Devil DDW03-E01 User Manual page 8

TEST FOR COlOUR FASTNESS
Wet a white absorbent cloth with the
solution. In a small hidden area of your
carpet/rugs /upholstery gently rub with
the dampened cloth. Wait ten minutes
and check for colour removal or bleed
with white paper towel or cloth. If your
carpet has more than one colour, check
all colours.
Test your carpet/rugs/upholstery –
Run the carpet washer over a small
hidden area. If no pile distortion occurs
continue cleaning.
Push handle into main body.
8
IMPORTANT: Your dirty water tank
is fitted with a float. When the dirty
water tank is full, or the nozzle is not
in contact with the carpet the float
will shut off the suction on the carpet
washer. You will be able to hear if this
has happened as the motor noise on
the machine will increase. Once the
float is activated, empty the dirty water
tank if full. If the dirty water tank is not
full then turn off your machine at the
power switch and wait for the float to
settle.
Always unplug the carpet washer
before performing any maintenance/
troubleshooting checks.
Turn handle lock dial clockwise to
lock in place.