Link To Cell App - Panasonic KX-TGF380 Operating Instructions Manual

To store "Trunk prefix": #119
3
Enter the desired number. a MSAVEN
4
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R After you copy the entries, confirm that the
numbers were transferred correctly.

Link to Cell app

For Android™ users
The free Link to Cell app helps you integrate your
Android phone with your DECT phone for
convenient use.
Important:
R Your cellular phone must support SPP (Serial
Port Profile) specification.
n Application (App) Alerts On/Off
This feature alerts your DECT phone when your
paired Android phone receives the following
alert information:
– [Google Calendar]™
– [Email]
– [Gmail]™
– [Text messages]
– [Facebook]
– [Twitter]
– [Instagram]
– [Low Battery] information
You can turn each type of alert on or off using the
Link to Cell app. If you turn the alerting app on,
your DECT phone alerts you with the
corresponding information.
n Phone Settings
Using your paired Android phone, you can
program your Phone Settings for the following
features:
– [Time adjustment]
– [Cell line only mode] (page 18)
– [International code], [Country code], and
[Trunk prefix] (page 52)
*1 When your paired Android phone is within the
base unit's range, the date and time
information is updated on the handset and
base unit's display, if time adjustment feature
is activated on your Android phone.
For assistance, please visit www.panasonic.com/support
TGF38x(en)_1205_ver101.pdf 53
*1
Using Bluetooth® Devices
Installing the Link to Cell app
Download links are also available at the web page
below.
www.panasonic.net/pcc/support/tel/appalerts
Starting the app for the first time
1
Make sure that your Android device's
Bluetooth feature is turned on and that your
Android device is paired to the base unit.
2
Start the Link to Cell app by tapping its icon.
3
Follow the on-screen instructions.
Important:
R For further information, refer to the instructions
on web page listed above.
R To use this feature, the following settings are
required.
– Android phone: Bluetooth must be turned on.
– Android phone: [Application Alerts
*1
manager] must be turned on.
– Handset or base unit: "Alert On/Off"
must be turned on (page 54).
R If this feature does not work, turn on your
device's Bluetooth feature, unplug the base
unit's AC adaptor, and then reconnect it.
*1 Turning on [Application Alerts manager]
Use the following procedure after installing the
Link to Cell app.
Android 2.x: Open your device's [Settings]
app. a Tap [Accessibility]. a Turn on the
[Accessibility] and [Application Alerts
manager] checkboxes.
Android 4.x: Open your device's [Settings]
app. a Tap [Accessibility]. a Turn on
[Application Alerts manager].
2014/12/05
53
10:20:15